My air filer was VERY dirty. I believe this part is available only from the dealer at this point. Not too bad, only $37. The following pictures should be sufficient to show you how to do the job. All you need is a flat-blade screwdriver. Note the notches in the filter and the "V" in the filter housing (and there's one on the underside of the cover) that have to be lined up.
2 comments:
The WIS said you need DAS to reset the filter data readout. Did you experience any problem after changing it?
No problems. There is a place in the FSS system menu where you can reset the item, but this is handled through the steerling wheel buttons (covered in a previous post). I don't know if the engine has a sensor that measures the restriction on intake air flow to tell you when to change the air filter.
Post a Comment